NIMONIC 75 (sheet) 2mm
NIMONIC 75 (sheet) 2mm
List of Features
NIMONIC 75
NIMONIC alloys are made up of nickel and chromium. These alloys are characterised by their high-temperature low-creep and high performance. Additives like titanium and aluminium are used for enhancing the strength of the alloy. The NIMONIC alloy was first developed during the 1940s in England.
NIMONIC alloys that are available commercially are NIMONIC 75. NIMONIC 90, NIMONIC 100, NIMONIC 80A, 81, 86, NIMONIC 90, NIMONIC PE11 and 16. The NIMONIC alloy 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. This alloy was first introduced for use as turbine blades during the 1940s. It is readily fabricated and welded. This alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Some of the standard forms in which this alloy is available are extruded section, hexagon flats, pipe, plate, strip and wire.
%chemical composition
| C | Ti | Cu | Si | Mn | Fe | Cr | Ni |
| 0.15 - 0.08 | 0.6 - 0.2 | ( max) 0.5 | (max) 1 | (max) 1 | (max) 5 | 21 - 18 | Balance |
Density and Modulus
| Modulus of Elasticity | Density |
| (GPA) 206 | 7.83 |
Mechanical Properties
| Elongation (A 5%) min | Yield Strength | Tensile Strenght |
| 42 | 275 | 750 |
Keyword : ,NIMONIC,75,NIMONIC 75,SUPERALLOY 75,ALLOY 75,SUPERALLOY,Buy superalloy,Sale of superalloy,Buy and sell superalloys,